Re: OKing Invoice takes ~ 10 sec.
Gatis Luckāns
10-3-17
Hi there,

So they have noticed this issue when opening paste special windows and okaying invoces.

There server is in the cloud, running CentOS 7.3.

And yes they do have halcust, but when running tests without halcust they had the same results.



Here are the results of latency tests they preformed:

RIXRO001#
Type escape sequence to abort.
Sending 1000, 1500-byte ICMP Echos to 94.237.25.94, timeout is 2 seconds:
Packet sent with a source address of 87.246.164.154
...
Success rate is 100 percent (1000/1000), round-trip min/avg/max = 36/40/96 ms
!
TLLRO001#
Type escape sequence to abort.
Sending 1000, 1500-byte ICMP Echos to 94.237.25.94, timeout is 2 seconds:
Packet sent with a source address of 213.219.82.250
...
Success rate is 100 percent (1000/1000), round-trip min/avg/max = 32/35/56 ms
!
VNORO001#ping 94.237.25.94 so 213.197.134.110 re 1000 si 1500
Type escape sequence to abort.
Sending 1000, 1500-byte ICMP Echos to 94.237.25.94, timeout is 2 seconds:
Packet sent with a source address of 213.197.134.110
...
Success rate is 100 percent (1000/1000), round-trip min/avg/max = 32/36/96 ms


Best Regards,
Gatis
Leave Comment
You can subscribe to notifications for this post by selecting the 'star' icon on the top right corner of the post.
Latest Posts
Carolina Valentino
are the activity set as Hansamanuals said? https://www.hansamanuals.com/main/mailnumber___62526/theconf___231/manuals/version___20250224/langcode___es/hwconvindex.htm?shortcode=HW0301SETTINGS_Order...
17:20 4 Apr 2025
Paul Timms
SendWebRequest3 is a boolean function, so if this returns true and the reply header has an accepted status, you can assume that the data was sent successfully and perform some actions on the record th...
11:12 4 Apr 2025